• <bdo id="xfxov"></bdo>

    <bdo id="xfxov"></bdo>

      <tbody id="xfxov"></tbody>
    1. <option id="xfxov"></option>

      Assembly elements for thermal insulated facades

      For the execution and simultaneous thermal bridge avoidance in the statically relevant fixation of loads in heat-insulating facades, there are general elements authorised by the construction inspection authorities for high levels of safety and security. Punctual planning is essential for ensuring that the arrangement of the elements and statistical measuring meet all the requirements.

      The authorised fixations are to be chosen via statistical measuring, and should be assembled prior to starting the insulation work. They must also be accepted by the third-party company responsible for the assembly, or carried out by the third-party company itself.

      OVERVIEW OF KEIM ASSEMBLY ELEMENTS

      Connection to facade elements

      A professional and permanently durable connection to fa?ade elements such as windows and doors might require a variety of specific product solutions which we provide according to individual requests.

      You will find information about the selection in our technical documents or via technical consulting.

       

       

        

      Connection to facade elements

      Dosteba Rondoline ? 90 / 125 (incl. milling tool)

      Pressure-resistant and CFC-free polyurethane support element for professional fastening of pipe clamps, coat-hanger rails, railings, awnings and outside lamps in ETIC systems.
      Lightweight purchased parts can be fixed thermal bridge-free directly in the cylinder.
      Anchoring in the masonry as base for high compressive loads.
      To be glued with KEIM Pulverkleber 90.

      Colour shade
      Black

      Thickness
      60 - 300 mm

      Thermal conductivity
      PU λ 0,04 W/mK

      Milling tool: ? 90 / 125 mm
      Packaging 1 piece

      Compressive force PD:
      1.1 kN (? 90 mm)
      2.1 kN (? 125 mm)
      on the complete cylinder surface

      KEIM Extension up to 340 mm
      Packaging:1 piece
       

       

      Dosteba Rondoline ? 90/125 mm

      Dosteba Quadroline PU

      Base for high compression loads
      198 x 198 mm
      To be glued with KEIM Pulverkleber 90

      Colour shade
      Yellow

      Thickness
      60 - 300 mm

      Thermal conductivity
      PU λ 0,04 W/mK

      Permissible compressive strength
      5.9 kN on the complete surface

      Packaging
      1 piece

      Dosteba Quadroline PU

      Ejot Iso Corner

      Generally approved mounting bracket for thermal bridge-free installation of purchased parts, e.g. French balconies, railings, fall protections or shutter catches. Required screws: EJOT Delta PT 100.
      Fastening screws depend on the substrate. Mounting element has to be exactly cut to length on the construction site. Approval upon request.

      Colour shade
      anthracite

      Packaging
      1 piece

      Sizes available
      140 mm, 200 mm

      Accessories
      EJOT Delta PT 100

      Ejot Iso Corner

      Ejot Spiraldübel (Spiral anchor)

      For the subsequent fixation of lightweight elements such as door signs on finished ETIC systems. Recommended service load for EPS panels: 3 kg
      For MW panels: 1 kg
      Cannot be used for the XPor-System!

      Packaging
      10 pcs/bag

        

      Ejot Spiraldübel (Spiral anchor)

      Dosteba Montageplatte DoRondo (Mounting plate)

      For thermal bridge-free installation of purchased parts, e.g. guide rails for exterior venetian blinds, lightweight signs, temperature sensors, directly in the mounting plate.

      Colour shade
      Blue

      Thickness
      10 mm

      Diameter
      90 mm

      Usable surface
      70 mm

      Packaging
      20 pcs/carton incl. milling tool

      Dosteba Montageplatte (Mounting plate)

      This site uses cookies. If you continue surfing on this site, you agree to the use of cookies.
      More details
      茄子视频下载