• <bdo id="xfxov"></bdo>

    <bdo id="xfxov"></bdo>

      <tbody id="xfxov"></tbody>
    1. <option id="xfxov"></option>

      Anchoring the insulation panels is absolutely mandatory for many systems. Which type of dowels are used, and how many, depends on a variety of factors. At least the certifications of the system, insulation materials and dowels need to be taken into account.

      What should you know?
      Condition of the substrate

      • Type of insulation material
      • Suitability of the insulation material to be dowelled.
      • Location of the reinforcement mesh compared to the dowel
      • Requirements in terms of the dowel's chi-value


      OVERVIEW OF DOWELS FOR KEIM ETIC SYSTEMS

      Hilti HTR-P Schraubdübel (screw anchor)

      Universal screw-in anchor with plate for concrete, solid and perforated building material and aerated concrete. Use category A-B-C-D-E. 
      Plastic screw for low thermal bridge effect. Chi-value 0.000 W/K when countersunk installed.

      European approval for EPS, mineral wool and mineral foam panels.
      Approval ETA 16/00116

      For countersunk installation from 60 mm to 260 mm panel thickness. 

      Use category A-B-C-D:    
      Drill hole depth:    40 mm
      Anchorage depth:    30 mm
          
      Use category E:    
      Drill hole depth:    60 mm
      Anchor diameter:    50 mm
          
      Plate diameter:    8 mm
      Colour shade:    Red/black
      Length:    100, 120, 130, 140 … 300 mm

      Order length = insulation material thickness + layer thickness of adhesive + fixing-in depth: 30 mm in solid and 50 mm in light construction material

      Packaging:
      100 pcs/carton up to 200 mm length
        50 pcs/carton from 220 mm length

      Hilti screw anchor

      Hilti anchor plates

      To achieve and improve the system bearing capacity in combination with Hilti HTR-P anchor.

      Hilti HDT 90
      For anchoring mineral wool panels

      Hilti HDT-140
      For anchoring mineral wool panels

      Colour shade
      White

      Packaging:
      100 pcs/carton

      Hilti anchor plates

      Hilti Setzwerkzeug SW-HTR (setting tool)

       

       

      For fast and simple fastening of the Hilti HTR-P dowel without having to change the setting tool. Makes a uniform, countersunk appearance easier.

      Packaging:
      1 piece/carton

      Hilti Setzwerkzeug SW-HTR (setting tool)

      EJOTHERM STR U 2G (screw anchor)

      Universal screw-in cap anchor for concrete, solid and perforated building material and aerated concrete, use categories acc. to A-B-C-D-E.
      Approved anchor for EPS- and mineral wool panels acc. to European Technical Approval ETA-04/0023, Z-21.2-1769.

      Countersunk installation from 100 mm panel thickness, also in combination with KEIM Teller VT 2G (plate), depth of drill hole 50 mm (90 mm) in the substrate. Countersinking and screwing in one step. Closing of insulating material with the appropriate STR cap to avoid anchor marks being shown.

      Installation flush with the surface from 60 mm panel thickness, drill hole depth 35 mm (75 mm) in the substrate. Installation with the STR-tool 2G, can be combined with Teller (plate) SBL 140 plus and Teller (plate) VT 90, closing of anchor sleeve with STR-plug made of polystyrene. Anchor load category: see ETA-04/0023

      Technical data

      Anchorage depth25 mm
      65 mm for aerated concrete
      Anchor diameter8 mm
      Plate diameter60 mm
      Lengths115 - 135 - 155 - 175 - 195 - 215 - 235 - 255 - 275 - 295 - 315 - 335 - 355 - 375 - 395 - 415 - 435 - 455 mm

       

      Order length = insulation material thickness + layer thickness of adhesive + possibly existing render thickness + anchorage depth

      Colour
      White

      Packaging
      ejotherm STR U 2G:
      100 pcs/carton

      STR-cap-EPS:
      100 pcs/carton

      STR-cap-EPS grey:
      100 pcs/carton

      STR-cap-MW:
      100 pcs/carton

      STR-tool-2G:
      piece

      STR-plug:
      500 pcs/carton

      EJOTHERM STR U 2G (screw anchor)

      Ejotherm Teller SBL 140 Plus (Plate) / Ejotherm Teller VT 90 (Plate)

       

       

      Ejotherm Teller SBL 140 Plus:

      In combination with STR U 2G (flush with the surface), NTK U and H1-ECO anchors for fixing MW-Lamellae.

      Packaging
      100 pcs/carton

      Ejotherm Teller VT 90:

      In combination with STR U 2G (flush with the surface), NTK U and H1-ECO anchors for fixing MW-Panels, application type WAP-zg.

      Packaging
      100 pcs/carton

      Ejotherm Teller SBL 140 Plus (Plate) / Ejotherm Teller VT 90 (Plate)

      KEIM Teller VT 2G (Plate)

      Countersunk installation in connection with ejotherm STR-U 2G from 100 mm panel thickness in mineral wool insulation panels type-WAP-zg. Countersinking and screwing in one step. Closing of insulating material with the appropriate STR cap MW to avoid anchor marks being shown.

      Plate diameter: approx. 110 mm

      Colour shade
      White

      Packaging
      100 pcs/carton

      KEIM Teller VT 2G (Plate)

      ejotherm NTK U – Schlagdübel (Hammer-in anchor)

      Hammer-in anchor with plastic nail and plate, premounted, for concrete, solid and perforated building material, use categories A-B-C.
      Approved anchor for EPS and mineral wool panels, acc. to European Technical Approval ETA-07/0026, Z-21.2-1844.
      Defined pull-in of the plate through telescope effect, can be combined with Teller (plate) SBL 140 plus and Teller (plate) VT 90.;

      Technical data

      Anchorage depth40 mm
      Anchor diameter8 mm
      Plate diameter60 mm
      L?ngen90 - 110 - 130 - 150 - 170 - 190 - 210 - 230 mm

      Colour shade
      White

      Packaging
      Length 90 - 150 mm:
      200 units/carton
      Length 170 - 230 mm:
      100 units/carton

      ejotherm NTK U – Schlagdübel (Hammer-in anchor)

      ejotherm STR-H A2 / ejotherm STR-H (Cap anchors)

      ejotherm STR-H A2

      Screw-in cap anchor for the constructive dowelling of mineral wool panels onto wooden substrates according to Z-33.47.727. Countersunk installation or flush with the surface is possible with TORX Bit T25.

      ejotherm STR-H

      For constructive anchoring of EPS panels onto wooden substrates

      Countersunk installation or flush with the surface is possible with TORX Bit T25.

       

      Technical data

      Anchorage depth 30 mm
      Plate diameter 60 mm
      Lengths 80 - 100 - 120 - 140 - 160 - 180 - 200 - 220 - 240* - 260* - 280* - 300* mm (*only as STR-H variant available)

      Colour shade
      White

      Packaging
      100 pcs/carton incl. STR-plugs
      Order length = insulation material thickness +40 mm

      ejotherm STR-H A2 (Cap anchor)

      Sanierfr?se (Renovation milling cutter)

      For mounting plate anchors flush with the surface when renovating facades in ETICS.

      Packaging
      1 piece

      Sanierfr?se (Renovation milling cutter)

      This site uses cookies. If you continue surfing on this site, you agree to the use of cookies.
      More details
      茄子视频下载